7 Common Maintenance Procedures for Motorcycles

Riding a motorcycle is a fun and reward experience. However, in addition to motorcycle gear, maintenance and repairs can quickly get expensive. Luckily, there are multiple actions you can take on your own to keep your motorcycle parts in good condition. In this post, we’ll look at 7 different things you can do to keep your motorcycle in good condition.

1. Regularly Inspect Your Tires

Taking the time to make sure your tires are in good condition is an important part of safe riding. When your tires aren’t inflated properly, they affect your ability to turn and brake. Overinflated tires can affect your ability to grip the road. Use a quality pressure gauge to check your tire pressure on a weekly basis. The owner’s manual will tell you the appropriate pressure level for your bike. Remember to inspect the overall condition of the tire and the tread depth.

2. Change Your Oil

Changing your oil is another way you can keep your bike in good condition. Your bike’s manual will guide you on how often you need to change your oil. If you ride your motorbike a lot, you can expect to change your oil multiple times per year. Driving in dirty or dusty areas will also cause you to have to replace your oil more often. Anytime you’re about to go on a long trip, check your oil. Always keep your oil at a high or the max level. Running on low oil will affect your bike’s performance.

3. Use High-Quality Fuel

The kind of gas you put in your motorcycle affects the performance you get. Low-quality fuel has more impurities and causes your fuel filter to get clogged faster. Make sure you take the time to clean your fuel filter from all debris. It’s worth taking time to inspect your fuel lines for any cracking or signs of damage. Damage in your fuel lines will require immediate repair so make sure you’re conducting regular inspections.

4. Inspect Your Battery

A lot of batteries get overlooked on motorcycles since they’re located so out of the way. If you notice your battery consistently dying, it’s likely becoming very discharged and is about to die. Take the time to inspect the acid level in your battery. Refilling the acid levels will help your battery maintain its charge if it’s dying often. You can also grease the terminals on your battery to avoid corrosion. If your battery keeps dying despite your maintenance, then it’s likely time for a new one.

5. Replace The Air Filter

Cleaning your air filter will reduce how hard your engine has to work. A clogged filter causes your engine to run harder to achieve the same effect. You can use compressed air to clear debris from your filter. Cleaning your filter will give your bike more power.

6. Inspect Your Drive Chain

The drive chain is an important part of your bike. It transfers power from your bike’s engine to your rear wheel. It’s worth taking the time to lube your drive chain after you’re done riding while it’s still warm. Lubing the chain while its warm allows the oil to get into all parts of the chain. Maintaining your drive chain will help you avoid dealing with expensive problems.

7. Check Your Brakes

Regularly inspecting your brakes will enhance your safety while riding your bike. You should take the time to test your brakes before each ride. Make sure you’re checking your brake fluid levels to ensure they haven’t dropped too low. Remember to inspect the thickness of your brake pads and get them replaced before the wear and tear becomes expensive to deal with.